
EUDR contingency arrangement: what to do if the Information System goes down
New EC contingency rules for EUDR Information System outages: when Upstream Operators can use the contingency DDS reference, and what to keep.
The European Commission has published its Contingency Arrangement for Unplanned Unavailability of the EUDR Information System, setting out what Upstream Operators and Traders should do if they cannot submit a due diligence statement (DDS) because the system is unavailable. The arrangement takes effect on 30 December 2026, the same day the EUDR begins to apply to large and medium Operators, so it is worth getting familiar with it now rather than in the middle of an outage.
The guidance gives a clear answer to a question many of our customers have asked us over the past year: what happens to goods waiting at the border, or orders waiting to ship, if TRACES is down and no DDS reference number can be generated? In short, the Commission has created a single, harmonised contingency reference number that can be used in place of a standard one, under strict conditions. Below, we walk through when it can be used, what it does and does not change, and the practical steps to follow if it is ever needed.
The contingency reference numbers
The Commission has set out two fixed identifiers, one for each type of submission:

These numbers are the same for everyone and are deliberately distinct from the standard reference numbers the Information System issues individual Upstream Operators after a successful submission. They exist for one purpose: to keep relevant goods moving at the EU's external borders and within the single market when submitting a DDS or SD is, in the Commission's words, objectively impossible. They do not need to be entered into the Information System (since they are intended to be used when the system is down), and they can be listed in customs declarations alongside standard reference numbers, under the same TARIC codes, for the same item or for different items.
When you can use them
The contingency numbers can only be used when both of the following conditions are met:
- The Information System has an unplanned outage lasting more than 60 minutes.
- That outage is confirmed on the Commission's Public Status Page.
Planned maintenance and scheduled updates are excluded, even when they run past the 60-minute mark. The Commission will announce those in advance through the News section of the Information System, and Operators are expected to plan their submissions around them. The arrangement also leaves API error messages and the connection to EU-CSW-CERTEX outside its scope, as those are covered by separate documentation.
The Public Status Page is the single source of truth throughout. It is fed by an automated monitoring system that records when an incident begins, and it will show clearly when an unplanned outage has passed 60 minutes and contingency measures are permitted. During an outage, a contingency landing page will replace the usual Information System page and link through to it. Once the status page shows the system has recovered, the contingency numbers can no longer be used for placing products on the market or exporting them, and Operators should return to the normal submission process straight away.
There are two further limits worth noting. The contingency numbers apply only to transactions that take place during the outage itself, whether that is placing goods on the market or lodging a customs declaration for import or export. And if a standard DDS reference number or SD identifier has already been issued for a shipment, that number must be used, even while the contingency status is live.
Due diligence still applies in full
The contingency number covers one gap only: the submission of the DDS or SD itself. Every other EUDR obligation stays in place. By using a contingency number, an Upstream Operator is confirming that due diligence has already been carried out under Article 8, that the information required under Annex II (or Annex III for simplified declarations) has been gathered, and that the products are deforestation-free and legally produced under Article 3(a) and (b). By passing the number to customs authorities or to Downstream Operators and Traders, the Upstream Operator takes on responsibility for the compliance of those products.
Record-keeping matters here too. Upstream Operators using a contingency number should:
- record and retain all the Annex II or Annex III data for the products concerned, for the period set out in Article 9(1);
- keep a brief explanation of why the DDS or SD could not reasonably have been submitted outside the outage window, before the customs declaration was lodged or the goods were placed on the market;
- keep evidence that the outage had passed 60 minutes at the time of the attempted submission, such as a screenshot of the Public Status Page.
The contingency number then travels down the supply chain in the same way as a standard reference number. Downstream Operators and Traders collect and keep the contingency numbers they receive from upstream suppliers under the same conditions that apply to standard reference numbers under Article 5(3).
Authorities will be watching how the numbers are used. Their use in customs declarations is recorded in customs systems, and competent authorities, working with customs, may carry out checks and ask for evidence that the conditions were met. Good records are the best protection.
Once the system is back up
The Commission has confirmed that no retrospective submission is needed. If a shipment was placed on the market or declared at customs using a contingency number during the outage, the operator does not have to go back and submit a standard DDS or SD for it once the Information System recovers. Any shipment placed on the market or exported after recovery, however, must be covered by a standard DDS or SD in the usual way.
This is a sensible, proportionate approach. It avoids a backlog of catch-up submissions after every incident and keeps the focus where it belongs, on the quality of the due diligence and the evidence behind it.
What to do if the Information System goes down
The arrangement includes a ten-step process for users. We have condensed it into the checklist below, which is worth sharing with anyone in your team who files DDSs or handles customs paperwork.
- Rule out a local problem. Check your internet connection, browser settings, internal IT restrictions and EU Login credentials, and try a different browser.
- Check the Public Status Page. Confirm that an incident is reported and whether it has passed 60 minutes. Until it has, keep monitoring the official updates.
- Wait for confirmation. Only use a contingency number once the status page confirms the 60-minute threshold has been passed and contingency use is permitted.
- Check for an existing reference number. If a standard DDS reference number or SD identifier has already been issued for the shipment, use that.
- Confirm compliance. Make sure due diligence is complete, the products comply with Article 3(a) and (b), and the only missing step is the submission itself.
- Use the contingency number. 00EU0000000000 for a DDS or S00EU000000000 for an SD, and only for the shipments affected by the outage.
- Keep your records. Retain the Annex II or III data, a screenshot of the status page and a short note explaining why the submission could not be made.
- Pass it on where needed. Provide the contingency number to customs, to competent authorities on request, and to Downstream Operators or Traders.
- Watch for recovery. As soon as the status page shows the system is back, return to standard submissions.
- No catch-up submissions. Shipments already completed under a contingency number need no retrospective DDS or SD.
How Interu helps
The contingency arrangement makes one thing very clear: an outage pauses the submission, and the responsibility for due diligence carries on regardless. Operators who can show their working, with supplier information, geolocation data and risk assessments gathered and stored before goods move, will be in a far stronger position if an authority comes asking how a contingency number was used.
Interu brings that evidence together in one place, linked to each product and shipment, so your due diligence is ready before you need it and the records sit alongside the DDS references you share with customers. If you would like to talk through how your team would handle an outage, or how Interu fits into your EUDR process ahead of 30 December, get in touch with our team.



